State guides / Alaska
Alaska private well testing guide
Last checked November 18, 2026
What the Alaska Department of Environmental Conservation says private well owners should test for, which communities regulate wells, and where DEC lists certified microbiology and chemistry labs.
Alaska’s Department of Environmental Conservation (DEC) is unusually blunt: the State of Alaska Drinking Water Program does not sample, test, or regulate water quality of private drinking-water wells, and sampling is the well owner’s responsibility. The only local governments that regulate private wells and set standards, DEC says, are the Municipality of Anchorage and the City of North Pole.[1]
This page summarizes official pages we fetched on November 18, 2026. If a state page later changes, follow the official page.
What to test, and how often
DEC’s private-wells page says to test at a minimum annually for nitrate and coliform bacteria, and to test for arsenic in certain areas. There is no State of Alaska requirement to sample a private well.[1]
DEC points to contaminants that occur naturally in Alaska: arsenic, nitrate, and sometimes radon. It suggests considering arsenic and nitrate tests, and a radon-in-water test if radon has been detected in the air of your home. It links to a University of Alaska Fairbanks Cooperative Extension publication, Contaminants in Alaska’s Water Resources, for more on these contaminants and treatment.[1]
DEC cites the National Ground Water Association’s annual-testing recommendation and says to test more often if:[1]
- The taste, odor, or appearance of the water changes
- Something is wrong with the well, such as a broken well cap
- There is a new contamination source: flooding, a chemical spill, or a septic failure
- Nearby excavation tied to resource extraction or well construction could create contamination pathways
DEC’s Drinking Water Program FAQ also lists the broader categories of contaminants to be aware of: bacteria and viruses, lead and copper, nitrate and nitrite, heavy metals such as arsenic and cadmium, volatile organic compounds such as benzene and gasoline, and synthetic organic compounds such as pesticides.[2] Wells with coliform bacteria should not be used for drinking until disinfected and retested clean.[1]
State lab services
We found no state public health lab testing offered to private well owners on the DEC pages we fetched. DEC’s Environmental Health Laboratory describes its work as chemical and microbiological analysis for state and national environmental-health programs and as certifying commercial and municipal labs for drinking-water compliance testing.[3] DEC’s answer to “how can I get my private well tested?” is to send samples to a State of Alaska certified laboratory.[2] We did not find a published state fee.
Certified laboratories
DEC recommends that all private-well samples go to a State of Alaska certified lab and publishes two lists:[1]
- Labs certified for chemical analyses of drinking water (contact: declabcert@alaska.gov, 907-375-8210)
- Labs certified for microbiological analyses of drinking water (contact: declabcert@alaska.gov, 907-375-8209)
Read the lists carefully:
- Each entry shows the lab’s certification number, an expiration date, and the exact methods and analytes it is certified for. Some entries we viewed, for example Alaska Water Laboratories in Wasilla and Admiralty Environmental in Juneau, show an expiration of 6/30/2026, which is earlier than the date we checked. Confirm current status with the lab or DEC.[4][5]
- The microbiology list marks with asterisks labs that do not accept samples from the public, such as a municipal utility lab or a military lab.[5]
- The chemistry entry we viewed for Alaska Water Laboratories lists nitrate-N as “Provisionally Certified” rather than “Fully Certified.”[4]
- DEC states that publishing the list does not guarantee the accuracy of any lab’s data.[4][5]
The microbiology list includes labs in Juneau, Wasilla, Palmer, Kodiak, Ketchikan, Nome, Dillingham, and out-of-state labs such as one in Seattle.[5] In a state this large, shipping time matters, so ask the lab how it handles bacteria samples that must arrive quickly.
If you want a mail-in kit instead
A commercial mail-in kit can cover tests the state lab does not offer, or fit a tighter schedule. If you use one, choose a laboratory that is certified for the specific tests you are buying, and check it against the official certified-laboratory list linked in this guide. This site has not verified any mail-in company's certification in Alaska. Confirm it with the company and, if the certification matters for a loan or sale, with the state agency.
A placeholder for a future kit link: Tap Score / other certified mail-in kits — TODO affiliate URL not added. See the affiliate disclosure.
This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local health department.
Sources
All of the following were fetched on November 18, 2026.
- Alaska DEC, Private Drinking Water Wells & Systems
- Alaska DEC, Drinking Water Program Information (FAQ)
- Alaska DEC, Environmental Health Laboratory
- Alaska DEC, Laboratories Certified to Perform Chemical Analyses of Drinking Water
- Alaska DEC, Laboratories Certified to Perform Microbiological Analyses of Drinking Water