State guides / Connecticut
Connecticut private well testing guide
Last checked November 18, 2026
Connecticut Department of Public Health's recommended private well tests and timing, the basic-indicators list with benchmark values, new-well testing rules, and where to find state-approved labs.
About 342,356 private residential wells serve roughly 23 percent of Connecticut’s population, more than 837,000 people, according to the Department of Public Health (DPH). Those wells are not regulated by EPA, and DPH says owners are responsible for their water and are generally not required by law to test it.[1][2]
This page summarizes official pages we fetched on November 18, 2026. If a state page later changes, follow the official page.
What to test, and how often
DPH’s Private Well Testing publication (#24a, May 2019) gives the recommendations in a table:[2]
| Test | When |
|---|---|
| Basic indicators | Every year, and after repair or replacement of the well, pump, or water pipes. Required for all new wells. |
| Lead (two samples: a first-draw and a flushed sample) | At least once; every 3 to 5 years if the water is corrosive; also when planning a pregnancy or when a child under 6 lives in the home. |
| Arsenic, uranium, radon | At least once; ideally repeat every 5 years. DPH says these occur naturally in groundwater in some parts of Connecticut and that high levels have been found “sporadically around CT,” and can fluctuate. |
| Volatile organic compounds (VOCs) | At least once; more often if a problem is identified or suspected (spilled or leaked gasoline, oil, solvents, or industrial chemicals). |
| Fluoride | Every 5 years when a child under 12 is present. DPH notes fluoride occurs naturally in wells throughout Connecticut. |
The basic indicators package and the benchmark values DPH lists are: total coliform bacteria (none present), nitrate-nitrogen (10 mg/L), nitrite-nitrogen (1 mg/L), pH (6.4 to 8.5), odor, chloride (250 mg/L), hardness (150 mg/L), apparent color, sulfate (250 mg/L), turbidity, iron (0.3 mg/L), and manganese (0.05 mg/L aesthetic, 0.3 mg/L health-based). DPH notes some of these standards are based on aesthetics and some on health risk.[2]
Test as well when you buy a house, when you have water-treatment equipment, and when taste, color, odor, or clarity changes. DPH notes that tests done at a home purchase are usually required by the mortgage lender and do not necessarily cover all contaminants.[2] For newly constructed wells, the Public Health Code section 19-13-B101 requires testing, and DPH says that required testing does not cover all contaminants.[2] DPH also tells owners to check with the local health department and neighbors about problems specific to the area.[2]
Where to get tested
DPH’s answer is to use any state-certified laboratory that is certified to test drinking water for the contaminants you request. If you collect the sample, ask the lab for instructions and follow them. DPH’s testyourwell.ct.gov site and the Private Well Program page link to the state’s list of approved laboratories.[2][3][4]
We did not find a state public health lab service for private wells, or a statewide fee schedule, on the pages we fetched. Fees are set by the individual labs, so get a quote that spells out which tests are in the package. Questions about testing and treatment can go to the DPH Private Well Program at 860-509-8401.[2]
Local rules that affect test results
DPH’s Private Wells page says state law gives DPH authority to set testing and reporting requirements, requires or allows testing before a certificate of occupancy in some cases, and covers who may collect samples for water-quality testing. It also lists provisions for wells within 200 feet of a community water supply system. Check the page and your local health department for what applies at your address.[3]
If you want a mail-in kit instead
A commercial mail-in kit can cover tests the state lab does not offer, or fit a tighter schedule. If you use one, choose a laboratory that is certified for the specific tests you are buying, and check it against the official certified-laboratory list linked in this guide. This site has not verified any mail-in company's certification in Connecticut. Confirm it with the company and, if the certification matters for a loan or sale, with the state agency.
A placeholder for a future kit link: Tap Score / other certified mail-in kits — TODO affiliate URL not added. See the affiliate disclosure.
This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local health department.
Sources
All of the following were fetched on November 18, 2026.