State guides / Missouri

Missouri private well testing guide

Last checked November 18, 2026

What Missouri health authorities recommend private well owners test for, how to use the State Public Health Laboratory, and when a certified mail-in kit is the better option.

Private wells in Missouri are the well owner’s responsibility. Public systems are tested on a schedule; a private well is not, unless you arrange it.[1] The Missouri Department of Health and Senior Services (DHSS) and the Missouri State Public Health Laboratory (SPHL / MSPHL) will test private drinking water as a public health service. They do not offer testing for real estate transactions.[2]

This page summarizes official guidance we fetched on November 18, 2026. If a state page later changes, follow the official page.

What to test, and how often

DHSS says you should have your well tested once each year for total coliform bacteria, Escherichia coli (E. coli), and nitrates. If you suspect other contaminants, test for those as well.[3] The department’s private drinking water page also says to test at least once each year, and anytime the well is serviced or the water changes in look, smell, or taste. Many contaminants are colorless and odorless, so testing is the only way to tell whether the water is safe to drink.[2] The department’s well sampling maps page repeats the annual-testing recommendation.[1]

Test again, even if the annual test is not due, if:[3]

Extra tests that depend on where you live

DHSS’s contaminants page adds local reasons to go beyond the annual bacteria and nitrate tests:

DHSS also hosts a Water Systems Council Well Owner’s Manual (the PDF’s creation date is 2016). That manual, which is not a DHSS regulation, says to test for bacteria every year; to test annually for nitrates if you live in an agricultural area or have an on-site septic system; to test for pesticides commonly used in intensive agricultural areas; to test water for radon if indoor-air radon is high; and to test iron, manganese, and sulfate if you have taste, odor, staining, or color problems.[5] Use it as background. For the official annual list, follow the DHSS kit page: total coliform, E. coli, and nitrates every year.[3]

SPHL’s private-well chemical panels, described below, include nitrates, fluoride, and many metals. They do not list pesticides, volatile organic compounds, or radon, so those tests would have to come from another laboratory.

How to get a test through the state

Start with your Local Public Health Agency (LPHA). DHSS and SPHL both say to contact that office for a collection kit and instructions. Some counties will also send a specialist to the well.[3] Find your agency in the DHSS local public health directory.[6]

The laboratory can test private groundwater wells, cisterns, and small private systems (no more than 25 people for at least 60 days a year, and no more than 15 service connections). Larger supplies fall under the Department of Natural Resources Public Drinking Water Branch.[3]

Ask the agency that issued your kit if you need help reading a report or checking the status of a sample.[3]

Bacteria tests at the State Public Health Laboratory

MSPHL tests about 7,000 private water samples for bacteria each year. Routine samples are tested for coliform and E. coli. Iron bacteria testing is available by special request. Results are presence or absence only, not a count.[7]

Chemical tests at the State Public Health Laboratory

The DHSS chemical-testing page describes two private-well panels:[10]

Get the kit and instructions from your LPHA.[10] SPHL’s chemistry pages add an important limit: private chemical samples must be submitted by an Environmental Public Health Specialist, Lead Assessor, or Environmental Specialist employed by a public health agency. If you want testing and public health is not involved, SPHL says to use a private laboratory and points you to DNR’s certified-lab program (573-751-5331).[11] Reports go out weekly; the submitter is called if a result is above the EPA contaminant level.[11]

We could not find a statewide SPHL dollar price for chemical testing. The metals and nutrients lab pages list fees as “N/A.”[11][12]

County testing options and published prices

Fees and drop-off rules can vary by county. The figures below are only what those county health departments published on the pages we fetched. They are not a statewide DHSS price list.

Callaway County Health Department sends completed kits to SPHL by daily courier. Kits must be returned the day of collection, before 11:30 a.m. Published prices:[13]

Test Published price Who collects it
Bacterial $10, payable to DHSS Homeowner
Bacterial $25 Environmental public health specialist
Chemical $25 Must be collected by an environmental public health specialist
Bacterial + chemical $40 Must be collected by an environmental public health specialist

Callaway also lists pH among the things it is “recommended to test… once each year.” That pH item is the county’s wording, not the DHSS annual list, which is total coliform, E. coli, and nitrates.[3][13]

Pike County Health Department offers kits during business hours, or an on-site visit with its environmentalist at no extra cost. Published prices and rules:[14]

We did not search every Missouri county. Ask your own LPHA for its current fee, hours, and whether a specialist will collect a chemical sample.

Certified laboratories

Missouri DNR publishes lists of laboratories certified to do compliance drinking-water testing:

DNR says a certified lab must be used for testing required by the Public Drinking Water Branch, but analysis of private residential wells does not have to be done by a certified laboratory. Other labs may produce equivalent results if their quality control is adequate. Labs marked commercial will do analyses for hire; DNR suggests contacting more than one for pricing.[15]

DHSS tells people who need testing for a real estate transaction to contact a private laboratory, and it links to those certified-lab lists.[2]

When a certified mail-in kit makes sense

The state route — an LPHA kit analyzed by SPHL — is the first option for the annual bacteria and nitrate tests, and it is inexpensive for bacteria ($10 at the state lab). A certified mail-in kit (for example, Tap Score or another commercial kit) is worth considering when official pages point you off the public-lab path, or when the public lab cannot do the test you need:

If you use a mail-in kit, pick one whose laboratory is certified for the tests you are buying. Missouri’s official rosters are the DNR lists above. We searched those lists on November 18, 2026, and did not find Tap Score or SimpleLab by name. That is not a judgment of the product; it only means we could not verify Missouri certification from the official lists. Confirm the lab’s current certifications with the company and, if you need Missouri certification, with DNR.

A placeholder for a future kit link: Tap Score / other certified mail-in kits — TODO affiliate URL not added. See the affiliate disclosure.

Next steps after you get results

Start with the agency that gave you the kit if you need help reading the report.[3]

Bacteria results. SPHL and DHSS describe the possible outcomes this way:[16][17]

If the sample is unsatisfactory for drinking, DHSS says to stop using the water for drinking and cooking, and to discard ice made from it, until the well is properly disinfected. For short-term use, boil the water vigorously for one full minute, or add two drops of regular household chlorine bleach (5.25 percent chlorine or higher) to each quart (double that if the water is cloudy or colored), mix, and wait 30 minutes. Check for above-ground defects such as bad seals or surface drainage toward the well.[16] Official well-disinfection instructions are in DHSS’s Disinfecting Your Private Water Well PDF.[18]

An SPHL “What To Do If Your Water is Reported Unsatisfactory for Drinking” form, still linked from the current bacteriological-testing page, also says to disinfect the well and distribution system, resample in about 5–7 days, and follow an initial unsatisfactory result with two consecutive satisfactory samples taken a week apart after disinfection. If results stay unsatisfactory after proper disinfection, the problem may be a construction defect that needs well work, not just another dose of chlorine.[19] That form is in DNR/DHSS’s archive path and still carries a 2014 revision date; one transit-time sentence on it (30 hours) does not match the current SPHL rule of 48 hours for private wells. Use the current 48-hour holding time.[7]

Chemical results. SPHL points you to EPA contaminant levels and calls the submitter when a result is above an EPA level.[11] For treatment options after a confirmed problem, DHSS keeps an additional water treatment resources page, including NSF guidance on home treatment and DNR well-construction information.[20]

A favorable bacteria test is not, by itself, proof that a supply is safe. SPHL notes that a sealed drinking-water supply should be analyzed routinely and that an Environmental Public Health Specialist can survey the well for defects.[17]

This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local public health agency.