State guides / Oregon
Oregon private well testing guide
Last checked November 18, 2026
Oregon Health Authority's domestic well testing recommendations, typical costs, how to use an accredited lab, and what to do with arsenic, nitrate and bacteria results.
In Oregon, people are only required to test their well water when selling a property with a well. For everyone else, the Oregon Health Authority (OHA) recommends regular testing “to protect your health.”[1]
This page summarizes official pages we fetched on November 18, 2026. If a state page later changes, follow the official page.
What to test, and how often
OHA’s table:[1]
| Test | Frequency | OHA’s typical cost |
|---|---|---|
| Coliform and E. coli bacteria | Every year | $20 to $40 |
| Nitrate | Every year | $20 to $40 |
| Arsenic | Every 3 to 5 years | $25 to $45 |
OHA says you may need to test more often if the well has a history of contamination, the septic system recently malfunctioned, household members have a stomach illness, infants drink the water, or equipment has broken. It notes you may wish to test for other contaminants too.[1]
How OHA says to test
- Send the sample to an accredited laboratory and use the collection kit the lab supplies. For a real-estate test, samples must be collected under OAR 333-061-0335 and analyzed by an accredited lab under OAR 333-061-0330.
- Get the sample to the lab within 24 hours of collection.
- Results are usually ready 1 to 3 business days after the lab receives the sample; arsenic can take up to 10 business days or longer.[1]
- If you test routinely, you do not need to report results; if selling, you report to the Domestic Well Safety Program.[1]
What OHA says to do with results
- Bacteria or nitrate present: OHA says this most likely means surface contamination has reached the well; you may need to adjust the area around the wellhead, inspect the system for damage, or install treatment.
- Arsenic: if an initial result is above 8 ppb, retest; if high concentrations continue, OHA says a treatment system should be installed, with continued testing every year at the faucet you drink from and every 3 years at the wellhead.[1]
The 8 ppb figure is OHA’s retest trigger; it is not the same number as the federal 10 ppb arsenic limit for public water systems.
Finding an accredited lab
OHA’s Oregon Environmental Laboratory Accreditation Program (ORELAP) accredits drinking-water labs. OHA publishes a drinking water testing page and a laboratory lists page; we could not read the lab rosters on those pages in this session, so we are not naming labs. OHA gives typical costs (above) rather than a state-lab fee schedule.
If you want a mail-in kit instead
A commercial mail-in kit can cover tests the state lab does not offer, or fit a tighter schedule. If you use one, choose a laboratory that is certified for the specific tests you are buying, and check it against the official certified-laboratory list linked in this guide. This site has not verified any mail-in company's certification in Oregon. Confirm it with the company and, if the certification matters for a loan or sale, with the state agency.
A placeholder for a future kit link: Tap Score / other certified mail-in kits — TODO affiliate URL not added. See the affiliate disclosure.
This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local health department.
Sources
All of the following were fetched on November 18, 2026.