State guides / Pennsylvania
Pennsylvania private well testing guide
Last checked November 18, 2026
Pennsylvania DEP and Penn State Extension private well testing recommendations, land-use-based tests, where to buy bacterial kits, and how to find a certified lab.
Pennsylvania’s Department of Environmental Protection (DEP) tells private well owners to test periodically, and spells out a short annual list. Penn State Extension says more than one million Pennsylvania homes use private water supplies, and that no government agency or program routinely tests them for homeowners.[1][2]
This page summarizes official pages we fetched on November 18, 2026. If a state page later changes, follow the official page.
What to test, and how often
DEP: test every year for total coliform bacteria, nitrates, total dissolved solids, and pH; test for other contaminants if you suspect them; and always use a state-certified laboratory that conducts drinking-water tests. DEP adds that because some contaminant tests are expensive, you should spend time identifying likely problems first.[1]
Penn State Extension (updated June 2, 2025) gives a slightly different split:[2]
- Every year: total coliform and E. coli bacteria.
- Every three years: pH and total dissolved solids (TDS). It notes water with a pH below 6.5 or above 8.5 can corrode lead and copper from plumbing, and TDS should be below 500 mg/L and fairly steady between tests.
- Every three years: added tests tied to land uses within sight of the home. Its table pairs mining with iron, manganese, sulfate, and aluminum; gas or oil well drilling with chloride and barium; industry with organic scans; and gas stations with petroleum products.
Extension says surveys indicate about half of private supplies have never been tested and that about 50 percent of private systems fail at least one drinking-water standard.[2] The two sources differ on how often to test pH and TDS (DEP yearly, Extension every three years); follow DEP if you want the stricter schedule.
Kits, labs and fees
DEP says bacterial test kits can be purchased from listed DEP regional and district offices, and gives their phone numbers by region on its page.[1] DEP does not run a general private-well lab fee schedule on the page we read; kit and test prices are set by each lab or office, so we are not quoting any.
Certified labs
DEP’s water testing page has a section “How Do I Find a Certified Laboratory?” and links DEP’s accredited-lab information.[1] Use a lab accredited for drinking-water analysis for the specific tests you want, and ask whether it accepts homeowner samples.
If you want a mail-in kit instead
A commercial mail-in kit can cover tests the state lab does not offer, or fit a tighter schedule. If you use one, choose a laboratory that is certified for the specific tests you are buying, and check it against the official certified-laboratory list linked in this guide. This site has not verified any mail-in company's certification in Pennsylvania. Confirm it with the company and, if the certification matters for a loan or sale, with the state agency.
A placeholder for a future kit link: Tap Score / other certified mail-in kits — TODO affiliate URL not added. See the affiliate disclosure.
This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local health department.
Sources
All of the following were fetched on November 18, 2026.