Topics

Arsenic in well water

Last checked November 18, 2026

What arsenic in a private well means for health, EPA’s 0.010 mg/L standard, how to test, and treatment types health agencies name.

Arsenic is a naturally occurring element that can dissolve into groundwater. It is one of the contaminants that a national U.S. Geological Survey study of private wells found among those most often present at a level of potential health concern, usually from geologic sources rather than a nearby spill.[1] You cannot taste or smell a typical arsenic problem. The only way to know is to test.

This page summarizes official guidance we fetched on November 18, 2026. If a source page later changes, follow the official page. This is not medical advice.

What arsenic is, and where it comes from

CDC lists common sources as natural deposits in the earth and industrial or farming pollution.[2] EPA’s national standards table lists erosion of natural deposits, runoff from orchards, and runoff from glass and electronics production wastes.[3] Missouri DHSS, as a state example, says arsenic has been found to occur naturally in Missouri and was once used as a pesticide in some older fruit orchards.[4]

CDC’s well-safety page includes “high levels of naturally occurring chemicals, such as arsenic or radon, in the land around a well” among the reasons well water can become unsafe.[5]

Health relevance

For long-term exposure above the federal MCL, EPA lists skin damage or problems with circulatory systems, and an increased risk of getting cancer.[3] The MCLG — EPA’s non-enforceable health goal — is zero.[3]

CDC lists the following symptoms in its chemicals-in-tap-water discussion of arsenic: nausea and vomiting, abnormal heart rhythm, and a feeling of “pins and needles” in the hands and feet.[2]

If someone in the household has symptoms you are concerned about, or if an infant, a child, or a pregnant or nursing person drinks the water, contact a clinician and your health department. This page cannot diagnose illness.

The EPA reference number

EPA’s National Primary Drinking Water Regulations set the arsenic MCL at 0.010 mg/L, effective as of January 23, 2006. The MCLG is zero. Units are milligrams per liter; 0.010 mg/L is the same as 10 micrograms per liter (10 µg/L, or 10 ppb).[3]

That MCL is enforceable for public water systems. It is not a legal limit on most private wells, but EPA tells private well owners to use the national standards as a reference, and to contact the health department and retest if a result exceeds a health standard.[6]

What a homeowner should do

Ask whether arsenic is a local concern, then test. CDC says all well owners should test for nitrates every year, and should ask a health or environmental department, or EPA, whether they should also test for arsenic and other chemicals of local concern.[7] Use a state-certified drinking-water laboratory.[7][6]

If a result is at or above 0.010 mg/L, or you are waiting on a confirmation test:

If treatment is needed. CDC lists these methods for removing arsenic from drinking water: reverse osmosis, ultrafiltration, distillation, and ion exchange. It says to find a water-treatment system certified to remove arsenic.[2] No single treatment type protects against every contaminant, so the system has to match the problem you actually have, and the water should be tested again after installation to confirm the treatment worked.[8]

When to call a professional

Call your health department for help interpreting an arsenic result and for advice about an alternate water source.[7]

Call a certified water-treatment professional or a licensed well contractor to select, install, and maintain a system that is certified for arsenic reduction. CDC says to contact your health department or a well water contractor to help determine the best treatment option.[8]

This guide is a reading of official pages, not personal medical advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local public health agency.

Sources

All of the following were fetched on November 18, 2026 (checked Nov 18, 2026).

  1. U.S. Geological Survey, Contamination in U.S. Private Wells — checked Nov 18, 2026
  2. CDC, Chemicals That Can Contaminate Tap Water — checked Nov 18, 2026
  3. EPA, National Primary Drinking Water Regulations — checked Nov 18, 2026
  4. Missouri DHSS, Contaminants (private drinking water) — checked Nov 18, 2026
  5. CDC, Well Water Safety — checked Nov 18, 2026
  6. EPA, Protect Your Home’s Water — checked Nov 18, 2026
  7. CDC, Guidelines for Testing Well Water — checked Nov 18, 2026
  8. CDC, Guidelines for Treating Well Water — checked Nov 18, 2026