Nitrate in well water
Last checked November 18, 2026
What nitrate in a private well means for health, EPA’s 10 mg/L standard, how often to test, and what to do if a result is high.
Nitrate is one of the few chemicals that EPA, CDC, and many state health departments tell every private well owner to test for every year. High nitrate is especially dangerous for infants. The federal drinking-water standard used as a reference is 10 mg/L, measured as nitrogen.[1][2]
This page summarizes official guidance we fetched on November 18, 2026. If a source page later changes, follow the official page. This is not medical advice.
What nitrate is, and where it comes from
CDC lists common sources of nitrate in water as fertilizers, septic systems that are not working correctly, animal feedlots, industrial waste, and food-processing waste.[3] Its well-testing page adds animal waste, wastewater, flooded sewers, polluted stormwater runoff, farm runoff, and decaying plants, and notes that geology around the well also matters.[2]
EPA’s national standards table lists runoff from fertilizer use, leaking septic tanks and sewage, and erosion of natural deposits as sources of nitrate and nitrite in drinking water.[1] EPA also tells well owners in intensive agricultural areas to consider testing for nitrate, nitrite, pesticides, and coliform bacteria.[4]
The U.S. Geological Survey, discussing a national study of private wells, has noted that nitrate does have natural sources, but that when it is present at levels of health concern it usually comes from man-made sources such as septic tanks or fertilizer, and that concentrations were higher in agricultural areas.[5]
CDC also cautions that if nitrate is high, other harmful chemicals or germs might also be in the water, and you should ask your local health department about additional tests.[2]
Health relevance
EPA’s potential health-effects language for nitrate (measured as nitrogen) is specific: infants below the age of six months who drink water containing nitrate in excess of the MCL could become seriously ill and, if untreated, may die. Symptoms include shortness of breath and blue-baby syndrome. The same wording appears for nitrite.[1]
CDC explains the underlying effect: high nitrate can decrease the ability of your blood to carry oxygen to your tissues. Infants younger than 6 months may be particularly at risk. Related symptoms can include decreased blood pressure, increased heart rate, headaches, stomach cramps, and vomiting.[3]
Missouri DHSS likewise says high nitrate levels are especially dangerous for infants, including when the water is mixed into formula, because of “blue baby” syndrome.[6] Illinois EPA repeats EPA’s infant wording alongside the 10 mg/L standard.[7]
If an infant drinks the water, or if someone is pregnant, contact your clinician as well as your health department. This page cannot take the place of that advice.
The EPA reference numbers
For public water systems, EPA’s National Primary Drinking Water Regulations set:[1]
| Contaminant | MCLG | MCL |
|---|---|---|
| Nitrate (measured as nitrogen) | 10 mg/L | 10 mg/L |
| Nitrite (measured as nitrogen) | 1 mg/L | 1 mg/L |
Those MCLs are enforceable for public systems, not for most private wells. EPA still tells private well owners to use the national standards as a reference when a lab report is not already compared to them.[4] Illinois EPA, writing for private well users, cites the same 10 mg/L nitrate-as-nitrogen MCL.[7]
Check that your report is in “nitrate as nitrogen” (sometimes written nitrate-N or NO3-N). A result labeled only as nitrate, without saying “as nitrogen,” may not be on the same scale. If the units are unclear, ask the laboratory or your health department before you compare the number to 10 mg/L.
What a homeowner should do
Test every year, and when conditions change. EPA and CDC both recommend annual testing of private wells for nitrates (along with total coliform bacteria, total dissolved solids, and pH). Test immediately if there are known groundwater problems in your area, after flooding or nearby land disturbance, after well repairs, or if the water’s odor, color, or taste changes. CDC also lists pregnancy, or a child starting to live in the home, as reasons to test.[4][2] Use a state-certified drinking-water laboratory.[2]
If the result is above 10 mg/L as nitrogen, or you are waiting on a confirmation test:
- Do not drink the well water, and do not use it to prepare infant formula, until you have advice from your health department and a plan for a safe source.[8][6]
- Use bottled water or another safe source. CDC says that if a well is contaminated with chemicals, you should not drink or use the water until it has been treated to remove the chemicals.[8]
- Do not rely on boiling. CDC states that boiling will not remove chemicals from water.[8][3]
- Contact your local health or environmental department. CDC says that office can help you understand the results and what to do next, and may recommend testing more often.[2]
- Have the well retested to confirm the result, as EPA recommends when a contaminant exceeds a health standard.[4]
- Ask about other tests. High nitrate can be a clue that septic waste, fertilizer, or other pollution is reaching the well.[2]
If a treatment system is needed, CDC lists ion exchange, distillation, and reverse osmosis, and says to find a system certified to remove nitrate.[3] No single treatment type works for every problem; a unit must be chosen for the contaminant you have, then tested to confirm it is working.[8]
Look for the source of the nitrate as well as a treatment device: a failing septic system, fertilizer or manure stored or applied too close to the well, or another nearby source. CDC’s well-safety page includes recommended setbacks from septic tanks, leach fields, livestock yards, and fertilizer or manure storage, and says to contact your health department if you think the well is polluted.[9]
When to call a professional
Call your health department for help reading a nitrate result and deciding whether additional testing or an alternate water source is needed, especially if an infant or a pregnant person is in the home.[2]
Call a licensed well contractor or a certified water-treatment professional to inspect the well and to size and install any treatment system. CDC says to contact your health department or a well water contractor to help determine the best treatment option, and to test the water after treatment to make sure it worked before you drink it.[8]
This guide is a reading of official pages, not personal medical advice. If an infant, a pregnant or nursing person, or anyone who is ill drinks the water, contact your clinician and your local public health agency.
Sources
All of the following were fetched on November 18, 2026 (checked Nov 18, 2026).
- EPA, National Primary Drinking Water Regulations — checked Nov 18, 2026
- CDC, Guidelines for Testing Well Water — checked Nov 18, 2026
- CDC, Chemicals That Can Contaminate Tap Water — checked Nov 18, 2026
- EPA, Protect Your Home’s Water — checked Nov 18, 2026
- U.S. Geological Survey, Contamination in U.S. Private Wells — checked Nov 18, 2026
- Missouri DHSS, Contaminants (private drinking water) — checked Nov 18, 2026
- Illinois EPA, Interpreting Test Results (private well users) — checked Nov 18, 2026
- CDC, Guidelines for Treating Well Water — checked Nov 18, 2026
- CDC, Well Water Safety — checked Nov 18, 2026