What to test for when buying a house with a well
Last checked November 18, 2026
Which private-well tests to order when you buy a house, when to test during the purchase, who may collect the sample, how FHA and VA rules fit in, and what to do with the results.
A private well is the well owner’s responsibility. The federal rules that protect public drinking-water systems do not apply to most private wells, and officials do not routinely test or treat that water for you.[1][2] If you are buying a house that uses a well, testing during the purchase is often your last chance to learn what is in the water before you own the system.
This page summarizes official guidance we fetched on November 18, 2026. If a source page later changes, follow the official page. This is not medical, legal, or lending advice. Confirm loan conditions with your lender and closing attorney or agent.
What to test for
The Centers for Disease Control and Prevention (CDC) and the U.S. Environmental Protection Agency (EPA) both say to test a private well at least once every year for total coliform bacteria, nitrates, total dissolved solids, and pH.[1][2] That annual list is the starting point for a purchase, not the whole list. See how often to test well water for the usual schedule after you move in.
CDC also says to ask your health department what other germs or chemicals to test for based on where you live, and lists chemicals worth asking about: volatile organic compounds (VOCs), lead, arsenic, mercury, radium, and pesticides or herbicides.[1] EPA publishes a condition-based table of extra tests — for example lead, copper, and pH if household plumbing may contain lead; radon if radon is present in indoor air or the region is radon-rich; nitrate, nitrite, pesticides, and coliform bacteria near intensive agriculture; and VOCs if you smell gasoline or live near tanks, dumps, factories, or dry cleaners.[2]
North Carolina State Extension, in a publication reviewed on October 28, 2024, and fetched tonight, gives a purchase-specific list. If you are planning to buy a home and want to evaluate the water, it recommends testing for coliform bacteria, nitrate, lead, iron, hardness, pH, sulfate, total dissolved solids, corrosivity, and other parameters depending on nearby contamination sources.[3]
Regional contaminants often sit outside a basic bacteria-and-nitrate panel. Ask the local health or environmental department, and use this site’s state guides for the state where the house is located, about arsenic, uranium and radon, PFAS, lead from household plumbing, and nitrate — especially if anyone in the household is or may become pregnant, or if an infant will drink the water.[1][4]
EPA’s PFAS-in-private-wells page says EPA does not regulate private wells, and that you should contact your state environmental or health agency for advice and for a list of state-certified laboratories that use EPA-developed drinking-water methods.[5] EPA’s public-system Maximum Contaminant Levels (MCLs) — for example 10 mg/L for nitrate measured as nitrogen, 0.010 mg/L for arsenic, 30 µg/L for uranium, and 4.0 parts per trillion for PFOA and for PFOS — are legally enforceable limits for public water systems. EPA tells private well owners to use those national standards as a reference when a lab report is not already compared to them. They are not a legal limit on a household well.[6][2]
Use a state-certified laboratory. CDC and EPA both say to do that; your state certification program or local health department can point you to one.[1][2][7] A mail-in kit whose analysis is performed by a certified laboratory, using the lab’s bottles and holding times, is a different product from a same-day strip test. See certified laboratories vs. home test kits.
North Carolina State Extension also cautions that water-treatment companies and plumbing-supply stores may offer free tests, and that any problem those companies identify should be checked with an independent laboratory before you invest in treatment or new plumbing.[3]
When to test during the purchase
The State Hygienic Laboratory at the University of Iowa, in a homebuyer guide fetched tonight, says well water should be tested as part of a home inspection, and that samples should be submitted to the laboratory as soon as possible so the closing is not delayed. It also recommends requesting construction logs and any previous water-quality or maintenance records, having a certified well contractor inspect the well, checking any in-home treatment systems and why they were installed, and having the septic system inspected, because a poorly maintained septic system can contaminate a well.[8]
Do not wait until the week of closing if you can help it. Two official lender rules on report age disagree, and both can be shorter than a typical closing timeline if you have to retest:
- FHA. Handbook 4000.1, Update 18, issued August 12, 2026, says that when a well test is required, the report may not be more than 180 days old from the disbursement date.[9]
- VA. Circular 26-17-19, fetched from VA’s site tonight, says that for VA purposes the test is valid for 90 days from the date certified by the local health authority, and that after 90 days another sample must be taken and the test completed.[10]
Order the tests early enough to leave time for a confirmation sample, a conversation with the health department, and any contract or loan discussion, and late enough that a lender-required report will still be in date at disbursement. A seller’s old report can be useful background, but it is not a substitute for a current test that meets the loan’s rules.
Who collects the sample
If the test is for an FHA or VA loan, the buyer, seller, or another interested party should not collect or carry the sample.
FHA Handbook 4000.1 says all testing must be performed by a disinterested third party, including collection and transport of the sample at the water supply source. The sample must be collected and tested by the local health authority, a commercial testing laboratory, a licensed sanitary engineer, or another party acceptable to the local health authority. “At no time will the Borrower/owner or other Interested Party collect and/or transport the sample.”[9] VA Circular 26-17-19 uses nearly the same rule, and says: “At no time will the Veteran or other interested party collect and/or transport the sample.”[10]
If you are ordering a test for your own due diligence, and it is not the loan file’s official sample, CDC and EPA still want the analysis done by a state-certified drinking-water laboratory. EPA’s Home Water Testing fact sheet notes that some laboratories send a trained technician to collect the sample, and that you should follow the laboratory’s containers and instructions.[1][4]
How FHA and VA requirements fit in
A lender test is about whether the property can close under that loan program. It is not automatically the same as a thorough buyer’s inspection. Ask the lender, in writing, which tests it needs, who must collect them, and how old the report may be.
FHA. Handbook 4000.1, Update 18 (last revised August 12, 2026), says that when an individual water supply is present, the mortgagee must ensure that water quality meets the requirements of the health authority with jurisdiction. If there are no local or state water-quality standards, the water must meet EPA’s National Primary Drinking Water regulations in 40 CFR §§ 141–142. A well water test is required for, but not limited to, properties that are newly constructed; where an appraiser has reported deficiencies with a well or the well water; where water is reported to be unsafe or known to be unsafe; or that are located in close proximity to dumps, landfills, industrial sites, farms (pesticides), or other sites that could contain hazardous wastes. When a test is required, the mortgagee must obtain a valid test from the local health authority or a laboratory qualified to conduct water testing in that state or locality, and the report may not be more than 180 days old from the disbursement date. The same section says a property is not eligible for FHA mortgage insurance if its water source includes a mechanical chlorinator or is served by springs, lakes, rivers, sand-point wells, or artesian wells. Ask the lender about the well type early.[9]
FHA well-distance waiver. On July 27, 2026, FHA INFO 2026-17 announced a general waiver of Handbook 4000.1’s well-distance minimum property requirements for existing construction. The official waiver, posted on HUD’s site, applies when the distances meet the local jurisdiction’s requirement and acceptable water-testing results are documented. “Local jurisdiction” means the local health authority, environmental agency, or governing municipality that has inspected, permitted, or grandfathered the private water system in its current configuration. The waiver does not apply to FHA’s minimum property standards for new construction.[11][12] Even where FHA no longer insists on its own distance table for an existing house, it still expects documented, acceptable water-test results.
VA. Circular 26-17-19 (July 19, 2017), fetched from VA’s site tonight, is VA’s published clarification of private-well testing for VA-backed loans. It says all testing must be done by a disinterested third party; the water must meet the local health authority’s requirements, then the state health authority’s if the local authority has none, then EPA’s if the state has none; and the test is valid for 90 days from the date certified by the local health authority.[10] The circular itself lists a rescission date of July 1, 2019, which is normal for a circular once the policy lives in the standing handbook. On June 25, 2026, VA announced updates to Pamphlet 26-7, Chapter 12, that took effect May 1, 2026. The topics VA listed were the radon-gas requirement, standards for homes built before and after 1978, detached improvements and Specially Adapted Housing jurisdiction, and non-vented heaters — not individual water-supply testing.[13] Ask your lender to confirm the current Chapter 12 language that applies to your loan.
Other government-backed loans, including USDA Rural Development, can have their own well-testing rules. Confirm those with that lender rather than assuming they match FHA or VA.
How to read the results, and what to negotiate
Your report should include the concentration of each substance tested. It may also say whether a result exceeds a national primary or secondary drinking-water standard. If it does not make that comparison, EPA points you to its MCL list.[2] Those public-system numbers are a reference for a private well, not a legal limit on the well. For a walk-through of units, MCLs, and secondary standards, see how to read a well water test report.
If a result is above a health benchmark, or bacteria are present, EPA says to contact your public health department and to have the well re-tested to confirm the result.[2] CDC says to consider drinking bottled water or another safe source, and to contact the local health or environmental department.[1] Iowa’s State Hygienic Laboratory likewise says not to drink the water, to contact the county health department, and that next steps may include additional sampling, disinfection, and/or treatment, followed by a retest.[8] For bacteria, see what to do with a coliform or E. coli result and how to shock-chlorinate a well. For treatment after a confirmed chemical result, see well water treatment options.
A confirmed problem can delay or block an FHA or VA closing until the water meets the standard that applies to that loan, or, for some well types, until the lender decides whether the property is eligible at all. That is a practical fact of the loan rules above, not a recommendation about how to write your contract. If you choose to negotiate, official sources support discussing at least a confirmation test from a certified laboratory; existing treatment systems, why they were installed, and whether they have been maintained;[8] and what the health department and the lender will accept before closing. Do not assume a pitcher filter or a treatment company’s free test will satisfy a lender or fix the underlying problem.[3]
Use the state guide for the house you are buying
Recommendations and certified-lab lists vary by state. Open the state guide for the state where the house is located. Each one starts with what that state’s health authorities tell private well owners to test for, then points to official testing routes.
When to call a professional
Call your local or state health department for a certified-lab list, advice on regional contaminants, and help reading a report.[1][7] Call a certified well contractor to inspect the well itself, and a septic professional if a private septic system is part of the property.[8] Call the lender or closing agent about who must collect the official loan sample, which tests are required, and how old the report may be.
This guide is a reading of official pages, not personal medical, legal, or lending advice. If someone in the household is ill, pregnant, or nursing, or if an infant drinks the water, contact your clinician and your local public health agency. Confirm loan conditions with your lender.
Sources
All of the following were fetched on November 18, 2026 (checked Nov 18, 2026).
- CDC, Guidelines for Testing Well Water — checked Nov 18, 2026
- EPA, Protect Your Home’s Water — checked Nov 18, 2026
- NC State Extension, Should You Have Your Water Tested? (AG-473-2; reviewed/revised Oct 28, 2024) — checked Nov 18, 2026
- EPA, Home Water Testing Facts (EPA 816-F-05-013, May 2005; still linked from EPA’s Home Drinking Water Testing page) — checked Nov 18, 2026
- EPA, PFAS in Private Wells — checked Nov 18, 2026
- EPA, National Primary Drinking Water Regulations — checked Nov 18, 2026
- EPA, Contact Information for Certification Programs and Certified Laboratories for Drinking Water — checked Nov 18, 2026
- State Hygienic Laboratory at the University of Iowa, A Homebuyer’s Guide to Private Well Water — checked Nov 18, 2026
- HUD, FHA Single Family Housing Policy Handbook 4000.1, Update 18 (issued Aug 12, 2026), section II.A.3.a on individual water supply systems — checked Nov 18, 2026
- VA, Circular 26-17-19, Clarification of Individual Water Supply System Testing (July 19, 2017; circular lists a rescission date of July 1, 2019) — checked Nov 18, 2026
- HUD, FHA INFO 2026-17, FHA Issues Waiver to Well Water Distance Requirements for Existing Construction (July 27, 2026), on HUD’s FHA INFO Messages page — checked Nov 18, 2026
- HUD, Waiver of Housing Directive, Individual Water Supply System well-distance requirements for existing construction (counsel determination dated June 25, 2026; field-office concurrence dated July 24, 2026) — checked Nov 18, 2026
- VA News, VA updates home loan appraisal requirements to help Veterans compete in today’s housing market (June 25, 2026) — checked Nov 18, 2026